Close

Tall Neck Support Caul

5.0
  • 2 Reviews
  • Write a review
New!

Tall Neck Support Caul

Item # 4482
In stock, ready to ship!

$26.47

+
 
Total:
Qty:
Scroll to Top

Tall Neck Support Caul

About This Item

"No more stacking my old caul on books to get the clearance I need to fret bolt-on necks!"
—Erick Coleman, guitar repairman and StewMac tech advisor

StewMac now offers a tall version of our neck support caul for necks with pitched headstocks. The added height allows the headstock to clear your work surface without having to stack the caul on blocks (or books) to get the height you need. The holes allow for secure clamping to your benchtop while doing fretwork, and caul clamping when gluing fingerboards to necks.

The neck caul gives excellent support under your guitar neck while pressing or hammering frets. It also functions nicely as a lower clamping caul when regluing a fingerboard.

The wooden support is specially contoured and lined with cork to get a firm, non-marring, non-skid hold on the neck.

Dimensions (approximate)
12" x 2-3/4" x 3-1/2" (305mm x 70mm x 89mm)


Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
5.0
  • 5.00 average rating from 2 reviews
Sort by
5.0

Good tool

By

Verified Buyer


Nice neck support with the added height. The holes allow for clamping .

5.0

Simple design works great.

By

Verified Buyer


Filled a real need. I needed to set the short caul on a piece (or two) of 2x4 for set necks or necks with a tilt back headstock. I had to very careful that those pieces stayed alaigned so as not to damage the guitar. There was no way clamp the caul to the bench either. This solves both problems. Thanks, Dan!