These extremely small, carbide-tipped bits are designed to be used in areas where a full size router bit isn't practical. They're just right for cutting the tight corners of pickup cavities, or scrollwork on headstocks (as seen on D'Angelico/D'Aquisto style guitars or F-Style Mandolins). These bits are also excellent for light duty template routing.
TIP: Don't cut the entire profile with this bit. Start with the larger bit then go back with this mini bit and hit just the spots where you need the smaller radii.
Cutter diameter: 3/16" (4.76mm) or 1/4" (6.35mm)
Cutter heights: 1/4" (6.35mm), 1/2" (12.7mm), 3/4" (19.05mm)
Shank diameter: 1/4" (6.35mm)
Also available with a 1/8" shank for use in Dremel Rotary Tools.